The Basic programme for WC cubicles consists of 3 standard types – 8 colours – 4 door widths- 2 heights – several cubicle solutions. Due to a variety of colours and designs for profiles, furniture, hardware, lippings and supporting legs the cubicle system is perfectly harmonising.

Type C-BASIC is perfectly suitable for both wet and dry areas with high demands towards stability, longevity and cleanability due to heavy usage of the cubicles. Walls and panels are made of 13mm thick water-resistant solid grade HPL ( High Pressure Laminate ). As an addition to the decorative layer the panels have a protective layer ( overlay ) and therefore are abrasion and scratch resistant. All visible edges have machine milled safety corners.

Type D-BASIC is the inexpensive solution for dry areas where quality, stability and harmonising design is important. Walls and doors are made of 30mm thick formaldehyde-free high density melamine resin coated particle board. All edges are protected with 3mm thick ABS lipping.

Type E-BASIC is an aesthetically beautiful cubicle system for both wet and dry areas. Walls and doors are made of 30mm thick steel sheet composite elements. The solid steel sheet is 0,6mm thick with an anticorrosive layer. Both sides are hot-dip galvanised, with an additional protective lacquer on the inside and a sturdy polyester lacquer on the outside. It is available in the colours white and grey.

Cubicle heights: 2000 mm for both walls and doors,
alternative 2135 mm for Type C-BASIC and D-BASIC

Upper panels: max. 2650 mm cubicle height

Under panel clearance: 150mm, adjustable range +25 / -5 mm

Door width: 570mm / 640mm (C,D) 620mm (E) / 750mm / 950mm

Cubicle depths: max. 2000mm ( standard: 1600mm )

Vestibule separation: without under panel clearance with one
door, height 2000 mm with upper panel up to 2650 mm cubicle height